# Sample Webalizer configuration file
# Copyright 1997,1998 by Bradford L. Barrett (brad@mrunix.net)
# Edited for Debian by Remco vd Meent (remco@debian.org>
#
# Distributed under the GNU General Public License. See the
# files "Copyright" and "COPYING" provided with the webalizer
# distribution for additional information.
#
# This is a sample configuration file for the Webalizer (ver 1.2x)
# Lines starting with pound signs '#' are comment lines and are
# ignored. Blank lines are skipped as well. Other lines are considered
# as configuration lines, and have the form "ConfigOption Value" where
# ConfigOption is a valid configuration keyword, and Value is the value
# to assign that configuration option. Invalid keyword/values are
# ignored, with appropriate warnings being displayed. There must be
# at least one space or tab between the keyword and its value.
#
# If you want to override the values specified in the configuration
# file, specify the '-c filename' option first on the command line.
# Additional command line options will override whatever was specified
# in the configuration file. You can also use multiple "-c" options
# on the command line (why? I don't know, but you can if you really want!).
#
# As of version 0.98, The Webalizer will look for a 'default' configuration
# file named "webalizer.conf" in the current directory, and if not found
# there, will look for "/etc/webalizer.conf". If applicable, just copy
# the sample configuration to the /etc/ directory, edit to suit and
# never have to specify the -c command line option again...
# LogFile defines the web server log file to use. If not specified
# here or on on the command line, input will default to STDIN.
#LogFile /home/vhosts/mon.ath.cx/htdocs/l
# OutputDir is where you want to put the output files. This should
# should be a full path name, however relative ones might work as well.
# If no output directory is specified, the current directory will be used.
OutputDir /home/customer/simoncarr/htdocs/content/logs
# HistoryName allows you to specify the name of the history file produced
# by the Webalizer. The history file keeps the data for up to 12 months
# worth of logs, used for generating the main HTML page (index.html).
# The default is a file named "webalizer.hist", stored in the specified
# output directory. If you specify just the filename (without a path),
# it will be kept in the specified output directory. Otherwise, the path
# is relative to the output directory, unless absolute (leading /).
HistoryName webalizer.hist
# Incremental processing allows multiple partial log files to be used
# instead of one huge one. Useful for large sites that have to rotate
# their log files more than once a month. The Webalizer will save its
# internal state before exiting, and restore it the next time run, in
# order to continue processing where it left off. This mode also causes
# The Webalizer to scan for and ignore duplicate records (records already
# processed by a previous run). See the README file for additional
# information. The value may be 'yes' or 'no', with a default of 'no'.
# The file 'webalizer.current' is used to store the current state data,
# and is located in the output directory of the program.
Incremental yes
# IncrementalName allows you to specify the filename for saving the
# incremental data in. It is similar to the HistoryName option where the
# name is relative to the specified output directory, unless an absolute
# filename is specified. The default is a file named "webalizer.current"
# kept in the normal output directory. If you don't specify "Incremental"
# as 'yes' then this option has no meaning.
IncrementalName webalizer.current
# ReportTitle is the text to display as the title. The hostname
# (unless blank) is appended to the end of this string (seperated with
# a space) to generate the final full title string.
# Default is (for english) "Usage Statistics for".
ReportTitle Usage Statistics for
# HostName defines the hostname for the report. This is used in
# the title, and is prepended to the URL table items. This allows
# clicking on URL's in the report to go to the proper location in
# the event you are running the report on a 'virtual' web server,
# or for a server different than the one the report resides on.
# If not specified here, or on the command line, webalizer will
# try to get the hostname via a uname system call. If that fails,
# it will default to "localhost".
HostName simoncarr.com
# HTMLExtension allows you to specify the filename extension to use
# for generated HTML pages. Normally, this defaults to "html", but
# can be changed for sites who need it (like for PHP embeded pages).
#HTMLExtension html
# UseHTTPS should be used if the analysis is being run on a
# secure server, and links to urls should use 'https://' instead
# of the default 'http://'. If you need this, set it to 'yes'.
# Default is 'no'. This only changes the behaviour of the 'Top
# URL's' table.
#UseHTTPS no
# HTMLHead defines HTML code to insert immediately after the
# section, before the report title. You can define as many of these
# as you want, and they will all be inserted in the order given.
# You _MUST_ specify the tag on the first one, do what you
# want on the rest (if any). Default is shown below.
#HTMLHead
# HTMLBody defined the HTML code to be inserted, starting with the
# tag. If not specified, the default is shown below. If
# used, you MUST include your own tag as the first line.
# Maximum line length is 80 char, use multiple lines if needed.
#HTMLBody
# HTMLPost defines the HTML code to insert immediately before the
# first
on the document, which is just after the title and
# "summary period"-"Generated on:" lines. If anything, this should
# be used to clean up in case an image was inserted with HTMLHead.
# As with HTMLHead, you can define as many of these as you want and
# they will be inserted in the output stream in order of apperance.
#HTMLPost
# HTMLTail defines the HTML code to insert at the bottom of each
# HTML document, usually to include a link back to your home
# page or insert a small graphic. It is inserted as a table
# data element (ie: your code here | ) and is right
# alligned with the page.
#HTMLTail 
# HTMLEnd defines the HTML code to add at the very end of the
# generated files. It defaults to what is shown below. If
# used, you MUST specify the and closing tags
# as the last lines. Max string length is 80 characters.
#HTMLEnd
# The Quiet option suppresses output messages... Useful when run
# as a cron job to prevent bogus e-mails. Values can be either
# "yes" or "no". Default is "no".
#Quiet no
# ReallyQuiet will supress all messages including errors and
# warnings. Values can be 'yes' or 'no' with 'no' being the
# default. If 'yes' is used here, it cannot be overriden from
# the command line, so use with caution. A value of 'no' has
# no effect.
#ReallyQuiet no
# TimeMe allows you to force the display of timing information
# at the end of processing. A value of 'yes' will force the
# timing information to be displayed. A value of 'no' has no
# effect.
TimeMe yes
# GMTTime allows reports to show GMT (UTC) time instead of local
# time. Default is to display the time the report was generated
# in the timezone of the local machine, such as EDT or PST. This
# keyword allows you to have times displayed in UTC instead.
#GMTTime no
# Debug prints additional information for error messages. This
# will cause webalizer to dump bad records/fields instead of just
# telling you it found a bad one. As usual, the value can be
# either "yes" or "no". The default is "no". It shouldn't be
# needed unless you start getting a lot of Warning or Error
# messages and want to see why. (Note: warning and error messages
# are printed to stderr, not stdout like normal messages).
#Debug no
# IgnoreHist shouldn't be used in a config file, but it is here
# just because it might be usefull in certain situations. If the
# history file is ignored, the main "index.html" file will only
# report on the current log files contents. Usefull only when you
# want to reproduce the reports from scratch. USE WITH CAUTION!
# Valid values are "yes" or "no". Default is "no".
#IgnoreHist no
# HourlyGraph and HourlyStats allows the hourly statistics graph
# and statistics table to be disabled (not displayed). Values
# may be "yes" or "no". Default is "yes".
HourlyGraph yes
HourlyStats yes
# The "Top" options below define the number of entries for each table.
# Defaults are Sites=30, URL's=30, Referrers=30 and Agents=15, and
# Countries=50. Tables may be disabled by using zero (0) for the value.
TopSites 30
TopURLs 30
TopReferrers 30
TopAgents 15
TopCountries 50
# The Webalizer normally strips the string 'index.' off the end of
# URL's in order to consolidate URL totals. For example, the URL
# /somedir/index.html is turned into /somedir/ which is really the
# same URL. This option allows you to specify additional strings
# to treat in the same way. You don't need to specify 'index.' as
# it is always scanned for by The Webalizer, this option is just to
# specify _additional_ strings if needed. If you don't need any,
# don't specify any as each string will be scanned for in EVERY
# log record... A bunch of them will degrade performance. Also,
# the string is scanned for anywhere in the URL, so a string of
# 'home' would turn the URL /somedir/homepages/brad/home.html into
# just /somedir/ which is probably not what was intended.
#IndexAlias home.htm
#IndexAlias homepage.htm
# The Hide*, Group* and Ignore* keywords allow you to change the
# way Sites, URL's, Referrers and User Agents are manipulated. The
# Ignore* keywords will cause The Webalizer to completely ignore
# records as if they didn't exist (and thus not counted in the main
# site totals). The Hide* keywords will prevent things from being
# displayed in the 'Top' tables, but will still be counted in the
# main totals. The Group* keywords allow grouping similar objects
# as if they were one. Grouped records are displayed in the 'Top'
# tables and can optionally be displayed in BOLD and/or shaded.
# Groups cannot be hidden, and are not counted in the main totals.
#
# The value can have either a leading or trailing '*' wildcard
# character. If no wildcard is found, a match can occur anywhere
# in the string. Given a string "www.yourmama.com", the values "your",
# "*mama.com" and "www.your*" will all match.
# Your own site should be hidden
HideSite *fury
# Your own site gives most referrals
HideReferrer fury/
# This one hides non-referrers ("-" Direct requests)
HideReferrer Direct Request
# Usually you want to hide these
HideURL *.gif
HideURL *.GIF
HideURL *.jpg
HideURL *.JPG
HideURL *.ra
# Hiding agents is kind of futile
# HideAgent RealPlayer
# Grouping options
GroupURL /cgi-bin/*
#GroupSite *.aol.com
#GroupSite *.compuserve.com
#GroupReferrer yahoo.com/
#GroupReferrer excite.com/
#GroupReferrer infoseek.com/
#groupReferrer webcrawler.com/
# The following is a great way to get an overall total
# for browsers, and not display all the detail records
#GroupAgent MSIE
#HideAgent MSIE
#GroupAgent Mozilla
#HideAgent Mozilla
#GroupAgent Lynx*
#HideAgent Lynx*
# The GroupShading allows grouped rows to be shaded as well. Useful
# if your groups intermingle a lot within the table and you want to
# diferentate the groups a little more (they are still in bold).
# Value can be 'yes' or 'no', with 'yes' being the default.
#GroupShading yes
# GroupHighlight allows the group record to be displayed in BOLD.
# Can be either 'yes' or 'no' with the default 'yes'.
#GroupHighlight yes
# The Ignore* keywords allow you to completely ignore log records based
# on hostname, URL, user agent or referrer. I hessitated in adding these,
# since the Webalizer was designed to generate _accurate_ statistics
# about a web servers performance. By choosing to ignore records, the
# accuracy of reports become skewed, negating why I wrote this program
# in the first place. However, due to popular demand, here they are.
# Use the same as the Hide*/Group* keywords, where the value can have a
# leading or trailing wildcard '*'.
#IgnoreSite bad.site.net
#IgnoreURL /test*
#IgnoreReferrer file:/*
#IgnoreAgent RealPlayer
HideSite mon.ath.cx
HideReferrer mon.ath.cx
# The MangleAgents allows you to specify how much, if any, The Webalizer
# should mangle user agent names. This allows several levels of detail
# to be produced when reporting user agent statistics. This currently
# only works for Netscape and MSIE type browsers. There are six levels
# that can be specified, which define different levels of detail
# supression. Level 5 shows only the browser name (MSIE or Mozilla)
# and the major version number. Level 4 adds the minor version number
# (single decimal place). Level 3 displays the minor version to two
# decimal places. Level 2 will add any sub-level designation (such
# as Mozilla/3.01Gold or MSIE 3.0b). Level 1 will attempt to also add
# the system type if it is specified. The default Level 0 displays the
# full user agent field without modification and produces the greatest
# amount of detail. Browsers other than MSIE and Netscape will always
# be left unmodified in the report.
MangleAgents 4
DNSCache /tmp/DNSCachesimoncarr.db
DNSChildren 10
AllAgents yes
AllReferrers yes
AllSearchStr yes
# End of configuration file... Have a nice day!